User's Manual

Operating the VS-66H3 6x6 HDMI Matrix Switcher
KRAMER: SIMPLE CREATIVE TECHNOLOGY
12
7.2.2 Acquiring the EDID from Several Outputs
To acquire the EDID from several outputs (for example, OUT 1 to IN 1
and OUT 6 to IN 3):
1. Connect the display devices to the outputs from which you want to
acquire the EDIDs.
2. Press the EDID and STO buttons simultaneously and hold them for 3
seconds.
Both buttons flash.
3. Press the input button to which the EDID will be copied (for example,
IN 1).
The selected input number flashes on the display.
4. Select the output from which the EDID will be acquired (for example,
OUT 1).
5. Press the IN 1 button.
The IN 1 number stops flashing.
6. Press the next input button to which the EDID will be copied (for
example, IN 3).
The selected input number flashes on the display.
7. Select the output from which the EDID will be acquired (for example,
OUT 6).
8. Press the IN 3 button.
The IN 3 number stops flashing.
9. Press the input buttons to which you want to copy the EDID (for
example, IN 1 and IN 3).
10. Make sure that the relevant input numbers flash on the display.
11. Press the EDID button.
The process is complete when the display returns to normal.
7.2.3 Acquiring the Default EDID
To store the default EDID on a selected input (for example, Input 2):
1. Press the EDID and STO buttons simultaneously and hold them for 3
seconds.
Both buttons flash.
2. Press the input (for example, Input 2) to which the EDID is to be
copied.
The selected input number flashes on the display.
3. Press the OFF button until "0" (zero) appears on the display.
4. Press the EDID button.
When the display returns to normal, the default EDID is stored on the
selected input.