User's Manual

6
VP-470 - Overview
#
Feature
Function
1
PROGRAM USB
Connector
Use for firmware upgrade
2
SDI IN BNC Connector
Connect to the SDI source
3
LOOP BNC Connector
Connect to an additional unit or a local display. The
signal is reclocked and equalized
4
SDI OUT BNC
Connector (1 and 2)
Connect to the SDI acceptor
5
5V DC
Connect to the +5V DC power adapter, center pin
positive
6
ON LED
Lights green when the unit is powered on
7
SDI LED
Lights blue when an SDI signal is detected on the input
8
MENU Button
Press to display the OSD (On-screen Display) menu.
When the OSD is not displayed, press together with the –
button to set the output resolution to 720p (1280x720)
9
ENTER Button
In the OSD, press to select the highlighted menu item.
When the OSD is not displayed, press together with the +
button to set the output resolution to 1080p
10
– Button
In the OSD, press to step up through the options or to
decrement the parameter value
11
+ / FREEZE Button
In the OSD, press to step down through the options or to
increment the parameter value.
When the OSD is not displayed, press to freeze the
display