User's Manual

6 FC-5 - Configuring the Kramer FC-5 Manager Software
5 Configuring the Kramer FC-5 Manager
Software
This section describes how to:
• Install and run the Kramer FC-5 Manager software, see Section
5.1
• Use the Translation List window, see Section
5.2
• Connect and assign the driver commands to the translation list, see Sections
5.2.1
, 5.2.2 and 5.2.3
5.1 Installing and Running the Kramer FC-5 Manager
Software
To install the FC-5 Manager software:
1. Insert the CD-ROM in the CD-ROM drive; double click the FC-5 Manager icon.
The Port selection window appears:
Figure 3: Port Selection Window
2. Choose the appropriate COM port for configuration via the serial cable and
click OK.
The Translation List window (see Figure 4
) opens.