Manualshelf

User's Manual

ManualsBrandsKramer Electronics ManualsHome Theater ServerKramer Electronics Kramer Electronics Home Theater Server FC-5
16171819202122232425
FC-5 - Upgrading the FC-5 Firmware
19
5. Follow the steps outlined in Section 7.3.
7.3 Upgrading Firmware
Follow these steps to upgrade the firmware:
1. Double click the JTG-Sender desktop icon.
The JTG-Sender window appears (see Figure 18
).
Figure 18: The JTG Sender Window
2. Select the required COM Port (to which the Remote Control is connected on
your PC ).
3. Press the File button to select the .jtg firmware file included in the package.
4. Click the Send button to download the file. The Send button lights green.
5. Wait until downloading is completed and the green Send button turns off.
6. Disconnect the 12V DC power.
7. On the underside (see Figure 12
), slide all three switches to OFF (Normal
Mode), using a screwdriver.
8. Connect the 12V DC power adapter to the power socket and connect the
adapter to the mains electricity.
The FC-5 now functions with the upgraded firmware.