User's Manual

14 FC-5 - Using the FC-5
6 Using the FC-5
You can use your FC-5 to transmit commands via the:
• PC or remote controller, see Section
6.1
• Contact closure, see Section
6.2
• Relays, see Section
6.3
• Contact closure and relays, see Section
6.4
6.1 Transmitting Commands via a PC or Remote Controller
You can use your FC-5 to transmit commands via a PC or remote controller:
Figure 13: Transmitting Commands via a PC or Remote Controller
Connect a PC or Remote Controller to the COM1 port and a controlled unit is
connected to the COM2 port. In this example, the PC or Remote Controller
transmits user-defined commands to the Kramer switcher