User's Manual

FC-5 - Configuring the Kramer FC-5 Manager Software 7
5.2 Using the Translation List Window
Figure 4 defines the Translation List window. Double clicking COMMAND(1) opens
the Edit command window (see Section
5.2.2).
Figure 4: Translation List Window
Feature Function
File menu
commands
New Creates a new blank file
Open Opens or finds a Protocol file (see Figure 5)
Save Saves the changed command list to the current
translation driver file
Save As Saves the current file with a different file name or
location
Exits Closes the application
Restart Not in use
COM Port Displays the Port Selection window (see Figure 3)
New Button Displays the New Command window (see Figure 6)
Edit Button Displays the Edit Command window (see Figure 7)
Remove Button Displays the Remove Command prompt (see Figure 8)
Close Button Closes the Command Translation List window
Assign Button Transmits the complete set to the COM ports of the FC-5 unit
The data is assigned to the “translation set” according to the DIP-switch
setting at the time that the Assign button is pressed