Owner manual

Contents
i
Contents
1 Introduction 1
2 Getting Started 1
2.1 Quick Start 2
3 Overview 3
4 Your FC-8 Wi-Fi - RS-232 Bridge 3
5 Connecting the FC-8 Wi-Fi - RS-232 Bridge 5
5.1 Connecting the Controlled Device to the FC-8 5
5.2 Connecting the FC-8 to a Network 6
6 Configuring the FC-8 Wi-Fi - RS-232 Bridge 6
6.1 Using the Default Network Configuration 7
6.2 Configuring the Host System to Operate with FC-8 7
6.3 Changing the FC-8 Configuration 8
6.4 Configuring an Active Station 12
7 Operating the FC-8 12
8 Technical Specifications 13
Figures
Figure 1: FC-8 Wi-Fi - RS-232 Bridge Front and Back Views 4
Figure 2: Connecting the FC-8 Wi-Fi - RS-232 Bridge (Ad-Hoc Network) 5
Figure 3: Connecting the FC-8 Wi-Fi - RS-232 Bridge (Access Point) 6
Figure 4: Wireless Network Connection Window 8
Figure 5: Serial Net Configuration Screen of the FC-8 9
Tables
Table 1: FC-8 Wi-Fi - RS-232 Bridge Front and Back Functions 4
Table 2: FC-8 Default Network Configuration 7
Table 3: FC-8 Serial Net Configuration Parameters 10
Table 4: Baud Rate Settings 11
Table 5: FC-8 Technical Specifications 13