User Manual

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your FC-47 HDMI to DVI/ Audio Converter
6
4.1 Connecting the FC-47 HDMI to DVI/ Audio Converter
To connect the FC-47, as the example in Figure 2 shows, do the following
1
:
1. Connect the DVI OUT connector to the DVI acceptor (for example, a
plasma display).
2. Connect the S/PDIF RCA OUT connector to the digital audio acceptor
(for example, an AV receiver).
3. Connect the HDMI source (for example, an HDMI set top box) to the
HDMI IN connector.
4. Connect the 12V DC power adapter to the power socket and connect the
adapter to the mains electricity.
Note that only the digital signal (DVI-D) is available on the DVI connector.
Figure 2: Connecting the FC-47 HDMI to DVI/ Audio Converter
1 Switch OFF the power on each device before connecting it to your FC-47. After connecting your FC-47, switch on its
power and then switch on the power on each device