User Manual

FC-340 – Contents
i
Contents
1 Introduction 1
2 Getting Started 2
2.1 Achieving the Best Performance 2
2.2 Safety Instructions 2
2.3 Recycling Kramer Products 3
3 Overview 4
4 Defining the FC-340 5
5 Installing the FC-340 in a Rack 7
6 Connecting the FC-340 8
6.1 Connecting a Serial Controller to the FC-340 9
6.2 Connecting to the FC-340 via Ethernet 9
6.3 Connecting the Balanced/Unbalanced Stereo Audio Output 12
7 Operating the FC-340 13
7.1 Changing the Output Resolution 13
7.2 Using the Menu 14
7.3 Resetting the Device to Factory Default Configuration 16
7.4 Locking and Unlocking the Front Panel 17
7.5 Updating the Firmware Using the K-Upload Software 17
8 Technical Specifications 18
9 Default Parameters 19
9.1 Default Communication Parameters 19
10 Kramer Protocol 20
10.1 Protocol 3000 Syntax 20
10.2 Command Part Details 21
10.3 Kramer Protocol 3000 Commands 22
Figures
Figure 1: FC-340 SDI Scaler/Embedder/Scan Converter Front Panel 5
Figure 2: FC-340 SDI Scaler/Embedder/Scan Converter Rear Panel 6
Figure 3: Connecting the FC-340 SDI Scaler/Embedder/Scan Converter 8
Figure 4: Local Area Connection Properties Window 10
Figure 5: Internet Protocol (TCP/IP) Properties Window 11
Figure 6: Balanced Stereo Audio Connection 12
Figure 7: Unbalanced Stereo Audio Connection 12