user manual

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the VP-81KSi 8x1 UXGA/Audio STEP-IN Switcher
18
6.9.2 Connecting via a Network Hub, Switch, or Router
You can connect the Ethernet port of the VP-81KSi to the Ethernet port on a
network hub, switch, or router, via a straight through cable with RJ-45 connectors.
The VP-81KSi Ethernet port has to be configured to be compatible with your
network (see
Section 6.9.3
6.9.3 Configuring the Ethernet Port on the VP-81KSi
).
To configure the Ethernet port on the VP-81KSi, download the P3K Ethernet
Configuration software
1
To configure the VP-81KSi Ethernet port:
to your PC, extract the files to a folder, and install the
software.
1. Click Start > All Programs > Kramer > P3K Wizard
The P3K Wizard window appears.
2. Click Connect.
The Connect window appears.
Figure 12: Connect Window
3. Select one of the following methods to connect to the Ethernet port of the
VP-81KSi:
1 Available from http://www.kramerelectronics.com