user manual

Using the MENU Command Sequence

8.5 Setting the STORE/RECALL KEYBOARD Mode

Choose one of these STORE/RECALL KEYBOARD modes:

 At ONCE mode in which setups are stored/recalled immediately

without the need for user confirmation

 CONFIRM mode in which storing/recalling setups require user

confirmation. The CONFIRM mode is the default

for

storing/recalling setups and is recommended to prevent

erroneously storing/recalling of setups

To set the STORE/RECALL KEYBOARD mode to the AT ONCE mode,

instead of the CONFIRM (default) mode, do the following:

1. Press the MENU button until reaching the STORE/RECALL setting.

The MATRIX Display shows the message:

STORE/RECALL setting

yes -> TAKE, next -> MENU

2. Press the TAKE button and choose the appropriate Outkey 1 for the AT

ONCE mode (Outkey 2 is for the CONFIRM mode).

The Displays show the messages:

STO/RCL mode

changed

current:

At once

8.6 Choosing What to INDICATE

Choose what is displayed during regular operation: between scrolling the

switcher setup as Figure 15 illustrates, and showing the IN/OUT range

Figure 15: Choosing what to INDICATE

1 The AT ONCE mode is the default for all actions except storing/recalling setups

2 Useful in an expanded matrix configuration