Owner's manual

10 622T, 622R - Connecting and Operating the 622T, 622R

5.2 Operating the 622T/622R Dual Link DVI Optical

Transmitter/Receiver

To properly operate the 622T/622R system:

• Make sure you have a media receiver or a graphic controller card with a dual

link DVI connector on your PC/Mac or SUN system.

• Make sure that your graphic card supports the maximum resolution of the

display you are about to connect

• Avoid “hot plugging” the 622T or 622R. This is not a recommended practice

with live digital voltages

5.3 Wiring the TP LINE IN / LINE OUT RJ-45 Connectors

This section defines the TP pinout, using a straight pin-to-pin cable with RJ-45

connectors.

Note, that the cable ground shielding must be connected / soldered to

the connector shield.

EIA /TIA 568B

Figure 5: TP PINOUT

Wire Color

1 Orange / White

2 Orange

3 Green / White

4 Blue

5 Blue / White

6 Green

7 Brown / White

8 Brown