K R A ME R E LE CT R O N IC S L TD .
Contents 1 Introduction 1 2 2.1 2.2 2.3 3 3.1 Getting Started Achieving the Best Performance Safety Instructions Recycling Kramer Products Overview Powering the 614T and the 614R 2 2 2 3 4 4 4 4.1 4.2 4.
1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadcasting professional on a daily basis.
2 Getting Started We recommend that you: Unpack the equipment carefully and save the original box and packaging materials for possible future shipment i 2.1 Review the contents of this user manual Go to http://www.kramerelectronics.com/support/product_downloads.asp to check for up-to-date user manuals, application programs, and to check if firmware upgrades are available (where appropriate).
2.3 Recycling Kramer Products The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC aims to reduce the amount of WEEE sent for disposal to landfill or incineration by requiring it to be collected and recycled. To comply with the WEEE Directive, Kramer Electronics has made arrangements with the European Advanced Recycling Network (EARN) and will cover any costs of treatment, recycling and recovery of waste Kramer Electronics branded equipment on arrival at the EARN facility.
3 Overview The 614T and 614R are a detachable optical transmitter and receiver for sending DVI-D signals with resolutions of up to 1920x1200 at 60Hz over one multimode fiber optic cable with SC connectors. The 614T converts the DVI-D signal to an optical signal that it transmits to the 614R. The 614R decodes the optical signals back to a single link DVI-D signal. The 614T and 614R feature: A maximum data rate of 6.75Gbps (2.
4 Using the Detachable Optical DVI System This section describes how to: Capture the EDID of the display device (see Section 4.1) Connect the One-Fiber Detachable Optical DVI Transmitter and receiver (see Section 4.2) 4.1 Troubleshoot the 614T and 614R (see Section 4.3) Capturing the EDID The 614T and 614R are connected via one channel that transmits R, G, B and clock signals. The EDID of the display device is captured by the transmitter for the computer to read.
4. Connect the 614T unit directly to the display device. The status LED flashes rapidly while reading the EDID and turns off after about 7-8 seconds. 5. Disconnect the 614T from the display. The new EDID information is stored. Figure 1: The Auto EDID Button on the 614T 4.
6. Turn ON the Power on the computer and the display device. 7. If the transmitter does not power up, connect the 5V power adapter to the 614T transmitter, and connect the adapter to the mains electricity. You can use the power supplied through a DVI pin from the graphic cards instead of using the power adapter. After completing the installation, if the system does not seem to work properly, reconnect the power adapter while the system is powered. 8. Set up the screen resolution as required.
If the screen is distorted or displays noise: Check if the graphics resolution is properly set Go to the Display Properties of Windows and check the settings Be sure that the resolution is set for WUXGA (1920x1200) at 60Hz, or lower Reset the system Disconnect and reconnect the optical DVI cables i 8 Be sure that at all times the cables are stored and used away from liquid or dirt.
5 Technical Specifications INPUTS: 1 single link DVI-D (614T), 1 multimode fiber optic with SC connector (614R) OUTPUTS: 1 multimode fiber optic with SC connector (614T), 1 single link DVI-D (614R) MAX DATA RATE: 2.25Gbps, up to WUXGA, 2K or 1080p @36bit color depth (does not support XGA) MAX. RANGE: 500m (1640ft) over 50/125m multi-mode fiber at WUXGA (1920x1200), 60Hz refresh rate POWER CONSUMPTION: 5V DC, 300mA max. (614T); 200mA max.
For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found. We welcome your questions, comments, and feedback. Web site: www.kramerelectronics.com E-mail: info@kramerel.
