Leaflet

Installation description
ISO universal radio mute 68001 &
68002
Needed items:
A. Mutebox.
B. Universal ISO cable.
C. Power & mute cable.
D. Carkit-adaptor.
E. Carkit.
Installation:
The universal ISO cable B is always deliv-
ered with mutebox A and Power & mute
cable C when delivered from Kram Tele-
com.
1. Remove the radio from the centre console.
2. Disconnect the speaker connector from the radio.
3. Connect the Universal ISO cable B between the speaker connector and the connector the wiring loom.
4. Connect the three fly wires 1 . The three fly wires are connected to the cars wiring-loom. The red wire should be connected to a constant
12v source, the blue to a Ignition source and the black should be connected to the ground. Note: If no ignitions wire can be found a IGNIBOX
item nr. 69600 can be inserted to generate a artificial ignition
5. Connect the Carkit-adaptor D to connector 2 on the Power & Mute cable C .
7. Unwrap and connect the carkit, the original speaker and power-supply cable are not to be used with this cableset. Connector 3 from the
carkit adaptor D is connected to the carkits power-supply input. Connector 4 from the carkit adaptor D is connected to the carkits speaker output.
8. Connect the yellow mutewire. The yellow mutewire 5 can be fitted to the radios mute input. By doing this you achieve that the radio
writes ”Mute” or ”Phone” when the phone is used and pauses the CD-player. Note: In some car models it might be necessary to connect the
mute wires to achieve a complete mute of the radio.
9. Refit the radio.
For further installation please refer to the carkit instruction manual.
Drive & Talk
The professional mute
See our complete Radio Mute program on our website
www.kram.dk
The professional mute
Drive & Talk
B
2
D
3
4
5
A
B
1
C
E