Instruction Manual

Loading the Rie
To load the magazine into the rie, align the ridge on the back of the magazine with the
recess in the breech on the right hand side of the action (g. 1). Press the magazine
into the breech from the right until it will not move further (g. 2 & 3).
To load a pellet, push the side lever all the way forward as far as it will go.
The rie is now cocked, loaded and ready to re.
To re the rie, disengage the safety by pushing the safety catch lever forward to the F
position. When safe to do so, take aim and squeeze the trigger to re the rie.
To load the next pellet and re again, pull the side lever all the way rearward and then
push fully forward, as above. This indexes the magazine and cocks the rie. You can
now re the rie again.
7
WARNING:
!
DO NOT INHALE DUST FROM LEAD PROJECTILES
OR PUT THEM IN YOUR MOUTH. WASH HANDS
AFTER HANDLING LEAD. LEAD PELLETS CONTAIN LEAD, A CHEMICAL KNOWN
TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS
(OR OTHER REPRODUCTIVE HARM).
WARNING:
!
USE THE CORRECT AMMUNITION SIZE FOR YOUR AIR
RIFLE MODEL. NEVER REUSE AMMUNITION. THE USE
OF ANY OTHER KIND OF AMMUNITION MAY CAUSE INJURY TO YOU OR DAMAGE TO
YOUR AIRGUN.
WARNING:
!
BE SURE THE AIRGUN IS ALWAYS POINTED IN A SAFE
DIRECTION. NEVER POINT THE AIRGUN AT ANYONE
EVEN IF IT IS UNLOADED. ALWAYS ASSUME AND HANDLE THE AIRGUN AS IF IT WERE
LOADED AND READY TO FIRE.
WARNING:
!
KEEP THE AIRGUN ON SAFE UNTIL YOU ARE READY TO
SHOOT, THEN PUSH THE SAFETY OFF.
g. 1 g. 2
g. 3