Instruction Manual

Loading the Rie
Rotate the clear cover of the magazine in the
direction of the arrow (clockwise) (g. 1).
Once rotated entirely, keep tension on the cover,
holding it in the rotated position (g. 2).
The rst pellet is loaded head rst, place a nger
over the hole on the back side of the magazine
while loading so the pellet does not fall through the
magazine. Once the rst pellet is loaded, you may
release tension on the cover (g. 3).
Then rotate the cover counter-clockwise, loading a
pellet head rst in each empty chamber (g. 4).
Once all chambers are lled with pellets, bring the
cover back to the start position (g. 5).
6
To remove the magazine, pull the side lever back to its rear most position. The
magazine can now be removed from the right side (same as side lever) of the rie.
WARNING:
!
USE THE CORRECT
AMMUNITION SIZE
FOR YOUR MODEL. NEVER REUSE AMMUNITION.
THE USE OF ANY OTHER KIND OF AMMUNITION
MAY CAUSE INJURY TO YOU OR DAMAGE TO YOUR
AIRGUN.
WARNING:
!
DO NOT INHALE DUST
FROM LEAD
PROJECTILES OR PUT THEM IN YOUR MOUTH.
WASH HANDS AFTER HANDLING LEAD. LEAD
PELLETS CONTAIN LEAD, A CHEMICAL KNOWN
TO THE STATE OF CALIFORNIA TO CAUSE CANCER
AND BIRTH DEFECTS (OR OTHER REPRODUCTIVE
HARM).
g. 1
g. 2
g. 3
g. 4
g. 5