Instruction Manual

Adjusting the Velocity
Locate the velocity adjustment knob on the right hand side of the rie. You can adjust
the velocity of your rie simply by turning this screw. Turning clockwise will increase
the velocity, counter-clockwise will decrease the velocity (g. 1). This adjustment can
be made at any time without risking damage to the rie.
On the left hand side of the rie is an indicator to help select your most common
velocity settings.
- = Low (g. 2)
+ = High (g. 3)
The marks do not indicate a specic velocity as this will change depending on the
pellet used.
Fore-arm Rail Installation
Your Kral PCP comes with a 2.5" weaver/picatinny rail section that can be installed
on the fore-arm of the stock.
To install, locate the threaded brass insert on the underside of the stock fore-arm.
Once located, take the rail section and line up the hole in the rail with the threaded
hole in the brass insert. Then install the allen head screw into the hole until the rail is
snug. You now have the ability to mount a variety of accessories to your Kral PCP.
g. 1
g. 2 g. 3
10