Owner's Manual
7
Owner’s manual
EN
CONNECTION
system.
Banana plugs
Use banana plug cables to connect the system.
Speaker cables
illustration). Please connect the left channel of the speaker to “L” terminal of the
corresponding “+” and “-”). The inversion of positive pole and negative pole results
in sound distortion and may lead to damage.
1. Strip of insulation and tighten the wires by hand
in order to settle its protruded places and avoid
short circuit.
2. Release the copper post in counter clockwise
direction, and put the wire end
into the hole.
3. Screw the copper post in
clockwise direction. Make sure
the connection is firmly executed.
Attention: the two pieces of the metal
wire of the cable never be touched
by each other.