User Manual

TEST RUN
A test run will help you become familiar with your air fryer, make sure it’s
working correctly.
1. Make sure the air fryer basket is empty and plug in the air fryer, the
Power Button will light up.
2. Press Power Button , the display will show “370°F” and “15
MIN”, then press the Time Down Button , and adjust the time setting
to“5 MIN”.
3. Press Start Button to begin preheating the air fryer. When it is done,
the air fryer will beep.
4. Pull out the basket and let it cool for 5 minutes. Then place the empty
basket back into the air fryer.
5. Press Power Button and select the Steak Icon . The display will
show “370°F” and “20 MIN”and the Steak Icon will blink.
6. Press Temp Up Button to “400°F”and long press Time Down
Button to change the time to 5 minutes.
7. Press Start Button to begin. When finished, the air fryer will beep.
8. Pull out the basket. This time, let the baskets cool completely for
10–30 minutes.
USING YOUR AIR FRYER
PREHEATING
We recommend preheating before placing food inside the air fryer,
unless your air fryer is already hot. Food may not be cooked thoroughly
without preheating.
1. Plug in. Press to turn on the air fryer.
2. Set the temperature and the time to “400℉，5Min”.
3. Press to begin preheating.
4. When preheating is done, the air fryer will beep 5 times, and you can
start to cook food.
AIR FRYING
1. Press to turn on the air fryer again after preheating.
2. Place the ingredients in the basket and then slide the basket back into
the appliance.
Note: An air fryer is not a deep fryer. Do not fill the baskets with oil, frying
fat, or any liquid.
Note: If the basket is overfilled, food
will cook unevenly. Food should not
be filled over the “MAX”line of the
basket.
15 16