User's Manual

KP Electronic Systems, Ltd.
WER2
–
User Manual
Rev: 0.
2
Page
6
of
9
K P P r o p r i e t a r y I n f o r m a t i o n
accepted by the user then the RF radio link is established. The WER2 upload all the unit
parametrs (see next chepters). The user can changed and dowenlods the new parameters.
a. General Setting
The General Setting includes the power modes: Power On and Flight Mode. The Flight mode is for
transportation or storage for long periode of time. The Flight Mode keeps the unit in the lowest level of
current consumer. In Flight mode the LCD is off as well as other periphrial like radio, sensors.
b. Drvice Parameters:
Drvice Parameters includes the radio long range parmeter i.e. the Tx and Rx radio frequencies (currently
the Tx and Rx freq should be the same. The device ID e.g. 40000. The number of wards in burst
repeatitions – it incread the communication reliability..