User's Manual
Restrictions:
1. Do not mount the unit on any kind
of metal surface.
2. Do not mount any input cable next
to the antenna (see figure).
Meter types:
1. There are two main types of meters:
2. Meters that produces a ‘Passive
Pulse’.
3. Meters that produces an ‘Active-
Pulse’ (known also as-‘’Pulse
Generator’).
Technical Specifications:
Operating Voltage
8–15 VDC
Standby Current 30µA max.
Tx Current 0.8A max.
Power Output 2W
Freq. Stability
2.5ppm at
operating temp.
range
Operating Temp.
-22F 120F
(-30
C
60
C)
Storage Temp.
-40
F
158
F
(-40C 70C)
Weight 0.5 lb.
(230 gr.)
Wiring:
1. Connect the two polls of the Meter input
cable to the meter using a self-stripping
insulated connector (like 3M-Scotchlock
or equivalent).
2. Polarity: if a ‘Passive Pulse’ type meter
is connected, there is no polarity so the
wires can be connected in any order, if
an ‘Active Pulse’ type meter is
connected, there is a polarity and the
wires have to be connected in the
following order: Red wire to the
POSITIVE (+) poll and the Black wire
to the NEGATIVE (-) poll,
(see figure 4).
The manufacturer is not
responsible for any Radio
or TV interference caused
by unauthorized
modifications to this
equipment.
Such modifications could
void the user’s authority
to operate the equipment.
Figure 4: Wiring
To maintain compliance with FCC’s
RF exposure guidelines, this
equipment should be installed and
operated with minimum distance
20 cm. between the radiator and
your body.
Use only the supplied antenna.