User's Manual

BSR100D™ Wireless Radio Modem Page 16 User Manual
5.1.7 Activating Self Test
After parameter values are loaded, perform a self-test:
1. Disconnect BSR100D from the PC
2. Press the self-test button
3. Observe the self-test led
5.1.8 On-Screen HELP
To view a brief explanation of any BSR100D parameter,
click the required parameter text box. The cursor will
appear in the designated text box, and the valid parameter
range, with a brief explanation, displays at the bottom of
the screen.
5.2 BSR100D Modem Programming Guide Using DATARADIO™
Field Programming (DFP) Software
The DATARADIO field programming (DFP) software provides programming
and diagnostics for the BSR100D Radio Modem. The DFP software allows
the user to edit and program user programmable settings, interactively tune
modem, and monitor diagnostic data from the BSR100D (See Figure 11: DFP
Software Startup Screen).
Figure 11: DFP Software Startup Screen
This manual assumes the DFP software has been installed on the user’s PC
with at least one operational serial COM Port available.