User's Manual

BSR100D™ Wireless Radio Modem Page 13 User Manual
5 Setting Communication Parameters
5.1 BSR100D™ Radio Programming Guide Using GUP10™
Using KP’s Gup10 Utility Program, the BSR100D™ parameter values listed
below can be programmed or modified.
• Transmit frequency (MHz)
• Receiver frequency (MHz)
• Tx time out (0-240 sec)
Connecting RADIO SET-UP cable using KP’s RS232 adaptor (RSINT001™)
are configured between the BSR100D and a PC (see Figure 9: BSR100D/PC
Connection Configuration).
Figure 9: BSR100D/PC Connection Configuration
5.1.1 Operating Instructions
• Connecting BSR100D to Gup10 (utility
program)
• Loading Parameter Values
• Changing Parameter Values
• Updating Parameter Value Changes
• Confirming Parameter Value Changes
• Activating Self Test
5.1.2 Connecting BSR100D to Gup10
Connect BSR100D™ to a PC using the RSINT001 adaptor
and cables
Click Start¾Programs¾KP Utilities¾GUP10.
The GUP10 main screen displays the device type, version,
status device diagnostics and parameters (see Figure 10:
Gup10 Main Screen)