Installation Guide

12’x20’ assembly manual
page 18
x32
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Parts Required:
W11 x2 W12 x2 W13 x2 W14 x2 W15 x2 W16 x2 W17 x2 W18 x2
W11
W12 W13 W14
W15 W16 W17 W18
X2
H3 x1
Z
Step 15: Snap Bracket
Snap Brackets (Part Z) to roof panel edges as shown in the diagram.
(with snaps facing upwards)
Tips:
1. Wearing protective gloves is recommended.
2. To prevent Z-Clips (plastic brackets) from sliding off prior to assembly, apply
double-sided adhesive tape (Part H3) to the underside (bottom) edge of the
roof panels where the brackets (Part Z) are supposed to attach.
3. You can use super glue (not included) to attach the brackets to the roof panel if
the double-sided tape doesn't work for you.