Installation Guide

10’x12’ assembly manual
page 4
A x4
L x4
#1
x12
#8 x16
R2
R2
Parts Required:
A
A
L
X12
3 inches
3/8
inches
M6
(Not included)
R2
x8
#1
#1
#1
A
L
R2
(Inclined Plane)
R2
#8
#8
#8
#8
Step 1: Set up Poles
Set up Poles (Part A) with Bracket (Part R2) and Stand Plates (Part L) using
screws #8 and #1 as shown in the diagram.
Reference for anchoring gazebo:
• If the ground is concrete and its depth is over 3 inches, you can purchase 3/8" diameter x 3" length
sleeve anchors.
• Only anchor after finishing all the assembly.
After assembly, we strongly recommend anchoring the gazebo to your deck or concrete as
shown above. Damage resulting from wind or improper anchoring is not covered under warranty.