Installation Guide
V3
V1
V2
V4
V5
V6
page 1510’x12’ assembly manual
Parts Required:
V1
V2
V3 V4
Z
X8
Z1 X4
X4
Z2
V5 V6
X2
H3 x1
Z
Z1
Z2
STEP 12:Snap Brackets
Snap Bracket (Part Z, Z1, Z2) to roof panel edges as shown in the diagram.
(with snaps facing upwards)
Tips:
1. Wearing protective gloves is recommended.
2. To prevent Z-Clips (plastic brackets) from sliding off prior to assembly, apply
double-sided adhesive tape (Part H3) to the underside (bottom) edge of the roof
panels where the brackets (Part Z, Z1, Z2) are supposed to attach.
3. You can use super glue (not included) to attach the brackets to the roof panel if
the double-sided tape doesn't work for you.