Cozy Rocking Love seat bench glider Assembly Manual Kozyard LLC Products www.kozyard.com Copyright 2016 - 2023 Kozyard LLC. | All Rights Reserved.
Care and warranty • The weight capacity of this chair is 250 lbs. • Clean the frame components and fabric with a mild soap solution, then rinse thoroughly. Avoid using bleach, acid, or any other solvents on either the fabric or frame components. • For a comprehensive warranty policy, please visit www.kozyard.com. Be aware that warranty terms can change without prior notification.
Part list PART LIST FIGURE QUANTITY DESCRIPTION A 1PC RIGHT ARM B 1PC LEFT ARM C 1PC BACK D 1PC SEAT E 1PC BASE F 2 PC GLIDER G 6+1PCS SHORT BOLT ( M6*18 ) H 2+1PCS MEDIUM BOLT ( M6*40 ) I 8+1PCS LONG BOLT ( M6*30 ) J 8+1PCS FLAT WASHER K 16+1PCS FLAT WASHER L 1PC ALLEN WRENCH M 1PC SEAT CUSHION N 2PCS BACK CUSHION
Step 1: 1. Place the right arm (A) upside down on a flat, protected surface. 2. Attach seat (D) to the right arm (A) with a flat washer (K) and a short bolt (G) using an Allen wrench (L). Do not tighten completely. 3. Attach the left arm (B) to the seat (D) with a flat washer (K) and a short bolt (G) using an Allen wrench (L). Do not tighten completely. Step 2: 1. Turn the seat assembly to an upright position. 2.
Step 3: 1. Gently tip the chair forward to the floor. 2. Attach the long arm of the glider support glider (F) to the bottom of the right arm (A) with a flat washer (J), flat washer (K), and a long bolt (I) using a wrench (L). Do not tighten completely. 3. Repeat the process to attach the glider (F) to the left arm (B). Do not tighten completely. Step 4: 1.
Step 5: 1. Turn the glider to an upright position so that it stands squarely on the floor. 2. Tighten all bolts securely using an Allen wrench (L). 3. Retain the Allen wrench (L) for use to tighten bolts periodically or as needed. Step 6: 1. Place the seat cushion (N) with bandage ties on the seat, and then put on the back cushions.
866-355-0018 Kozyard LLC © Copyright 2016 - 2023 Kozyard LLC. | All Rights Reserved.
