The next generation remote control FIIRE REMOTE CONTROL UNIT User Manual
Table Of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . 2 Battery Installation and Information . . . 2 Battery Saver . . . . . . . . . . . . . . . . . . . . . 2 Gyro Operation . . . . . . . . . . . . . . . . . . . 3-4 Product Diagram. . . . . . . . . . . . . .. . . . . . 5 Button Cluster Locations. . . . . . . . . . . . . 5 RCU Mode Selection. . . . . . . . . . . . . . . . 5 Transport Control . . . . . . . . . . . . . . . . . . 6 Menu Navigation . . . . . . . . . . . . . . . . . . .
Gyro Operation The RCU provides in-air control of the Fiire system’s cursor via patented gyroscopic motion sensing technology. This means mouse-like cursor control, from anywhere in the room, without the need of a flat surface. The FiireChief controls both the FiireEngine and FiireStation using RF wireless. There is no line-of-sight requirement so you don’t have to point the RCU at the Fiire system you are controlling.
the faster it goes. Or press and hold the button, and don’t let go while you move into the blue arrows and keep the button held down for absolute positioning. Now moving your hand 45 degrees to the left is the beginning of the media, and 45 degrees right is the end. Move back and forth until you find the part you want and then let go of the button to resume normal playback.
Product Diagram Button Cluster Locations Function Remote Control Unit B Transport control C Menu navigation and Menu navigation: UP, DOWN, LEFT, mouse buttons RIGHT and SELECT (similar to OK A B Button Cluster A Selects device mode (PC, TV, mode selection and power CAB/SAT, AUX). Powers on/off selected device. AV control for selected transport or for Fiire System button). Includes standard LEFT and C RIGHT mouse buttons, OK and X, BACK and TV GUIDE.
Transport Control A H B G C E F D TV, AUX orCAB/SATmode Fiire Mode A Puts selected device into Stop mode, if supported Stops media playback and brings the main menu in front B Puts selected device into Pause mode, if supported First button press pauses the media at present position. Subsequent button presses toggles between pause and playback at present position pointer.
Menu Navigation A C E B F H D G A No action, or as defined by selected device B No action, or as defined by selected device C No action, or as defined by selected device D No action, or as defined by selected device E Menu Navigation Up Goes back one screen to previous location F Menu Navigation Right Moves focus point right one position G Menu Navigation Down Moves the focus point down one location H Menu Navigation Left Moves focus point left one position I Performs action indicated by foc
Channel/Volume Control, Mute Volume Gyro stop F A B C E D TV, AUX orCAB/SATmode A Gyro stop Fiire Mode B Increment the current channel by 1 To reposition your hand press and hold the gyro ‘stop’ button to freeze the pointer. Double-click it to de-activate the gyro. Then press it again, or press one of the 3 gyro buttons, to re-activate it. Increment the current channel by 1. Move one position up in playlist. C Decrement the current channel by 1 Decrement the current channel by 1.
Fiire Shortcut Buttons A Acts as a shortcut to the “Pictures” A B C D B Acts as a shortcut to the “Recorded TV” C Acts as a shortcut to the “Music” D Acts as a shortcut to the “Videos” Numeric Keypad A B C E D TV, AUX orCAB/SATmode Fiire Mode A Standard 1-9, alphanumeric Standard 1-9, alphanumeric B Inserts a * symbol, if supported by the selected device * C Inserts a # symbol, if supported by the selected device # D Clear, if supported by the selected device E Enter, if supported by the se
Backlighting The RCU Mode Selection buttons are backlit. One of these buttons lights up whenever a button is pressed on the remote to indicate which Control Mode the remote is in; PC, TV, AUX, or CAB/SAT. If the backlighting seems dim, the batteries may need to be replaced. There is no backlighting on any other buttons. ON/OFF Switch This switch turns the selected device on or off. The device is selected with the RCU Mode Switches; PC, TV, AUX and CAB/SAT.
Setting Up and Synchronizing a Gyration GO Mouse or Keyboard and the transceiver The same transceiver that you used with the Fiire Chief can be used with gyration mouse or keyboard. The connect button on the transceiver is only used to connect a gyration mouse or keyboard. Don’t use the connect button to connect the Fiire Chief. The Fiire chief does an ‘one way’ connection so you only press the connect button on the Chief and not on the transceiver. 1.
Programming Methods Using Direct Entry 1. Turn on the device you want to operate (TV, DVD player, etc.) 2. Look up the brand and code number(s) for the device in the Remote Code List at the end of this booklet. 3. Press and hold the device button you want to program on the RCU. 4. Enter the 4-digit code from the Remote Code List. If all the mode buttons flash, you have either entered an invalid code or the button isn’t programmable.Using Direct Entry 5.
Learning The RCU has the ability to learn the commands of other remote control units, such as TV remotes or VCR remotes. This allows the most-used commands on those remotes to be combined on the RCU. These original remote control units are also known as source remotes. Learning is not active in the PC mode. Learning Tips 1. All learned functions for a mode can be erased if you program a different device to that mode. 2.
Clearing an Individual Learned Function To delete a learned button function, use the procedure below. 1. Press and hold the component mode button (the component button lights). Then press and hold the CLEAR button for 3 seconds. Hold both buttons depressed until the component mode button flashes. 2. Release both buttons. The component mode button turns on indicating that the RCU is now in the Clear Learned Function mode for that component. 3. Press and release the button where learning is to be cleared.
Remote Code List TV Brand Codes AOC 1005 ---------------------------------------------------------------------------------------------------------------------------------------Candle 1005 ---------------------------------------------------------------------------------------------------------------------------------------Citizen 1005 ---------------------------------------------------------------------------------------------------------------------------------------Colortyme 1005 -----
Remote Code List TV Brand Codes ---------------------------------------------------------------------------------------------------------------------------------------RCA 1000 1001 1005 1009 1082 1095 ---------------------------------------------------------------------------------------------------------------------------------------Runco 1014 ---------------------------------------------------------------------------------------------------------------------------------------Sampo 1005 -------
Remote Code List VCR Brand Codes ---------------------------------------------------------------------------------------------------------------------------------------Philips 2009 2015 ---------------------------------------------------------------------------------------------------------------------------------------Philips Magnavox 2015 ---------------------------------------------------------------------------------------------------------------------------------------Pioneer 2016 ---------
Remote Code List AUDIO Brand Codes Aiwa 4044 4052 ---------------------------------------------------------------------------------------------------------------------------------------Apex 4105 ---------------------------------------------------------------------------------------------------------------------------------------BOSE 4100 ---------------------------------------------------------------------------------------------------------------------------------------Denon 4028 4036 4048 4049 4053
Remote Code List CABLE Brand Codes ABC 5035 ---------------------------------------------------------------------------------------------------------------------------------------Comcast 5039 ---------------------------------------------------------------------------------------------------------------------------------------Contec 5034 ---------------------------------------------------------------------------------------------------------------------------------------GE 5035 ------------------
Phone: Toll-free (U.S. only): (877) on-fiire Los Angeles, CA, USA: +1 (213) 325-266 Email address: info@fiire.com U.S. Patent Numbers: 5,440,326; 5,898,421; 5,825,350 and other pending patents. GYR3201US - DL02829-001 Rev. B - Made in China.
