Instructions

ManualsBrandsKOSO ManualsMultifunction MeterKOSO D2 Multifunction Meter

Accessories

LCD Meter

wh080ba00a(9-1)

Attention!

● For installation, follow the steps described. Any damage caused by wrong installation shall be imputed to the users.

● To avoid a short circuit from occuring do not pull or modify the wires during installation.

● Do not disassemble or change any parts. Opening and dissassembling this unit will void any warranty.

● Maintenance and repairs should be executed by our professionals only.

◎ Symbol description:

NOTE

WARNING!

Some procedures must be followed to avoid damages to the instrument.

Certain procedure must be followed to avoid damages to yourself, to the vehicle or others.

LIGHT ONFLASH

HOLD THE

BUTTON 3

SECONDS

HOLD THE

BUTTON ONE

SECONDS

Thank you for purchasing our product. This product is a multifunction meter and is easy to install. Before using, read t

he instructions

carefully and retain them for future reference.

●

Wiring Installation Instructions

2-1

Connect to the original wiring harness

Vehicle installation instructions

2-2

❷

❶

❶ LCD Meter

❷ The original wiring harness

Disassemble in the following order

Before assembly, assemble the

❶ LCD Meter in advance (refer to

2-3 Installation Instruction).

Refer to the sequence of the

drawing for the removal.

Perform the assembly in a

sequence reverse to the removal.

NOTE

LCD Meter (Accessory 1)

16.3-21.7Nm (163-217 kgf.cm)

Summary of content (9 pages)

PAGE 1
● Thank you for purchasing our product. This product is a multifunction meter and is easy to install. Before using, read the instructions carefully and retain them for future reference. Attention! ● For installation, follow the steps described. Any damage caused by wrong installation shall be imputed to the users. ● To avoid a short circuit from occuring do not pull or modify the wires during installation. ● Do not disassemble or change any parts.
PAGE 2
-3 Installation instructions Follow the steps below . T R 1. Meter bracket (from original supplier) 2. Waterproof outer lining (from original supplier) +LCD Meter (Accessory1) 3. Bushing (from original supplier) 4. Screw (from original supplier) 1.4-1.9Nm (14-19 kgf.cm) 2. 3. 3. 4. 3. 3. 1. 4. 4. 4.
PAGE 3
-3 Main menu functions ●In the total mileage screen, press the button once to switch to Trip A screen. ●In the total mileage screen, hold the button for 3 seconds to enter into the setting screen.(refer to setting 4) ●Trip A screen, press the button once to switch to Trip B screen. ●Hold the button for 3 seconds to clear the Trip A recordings. ●In the remaining mileage screen, press the button once to switch to the clock screen.
PAGE 4
Setting Screen Switching Description ●Press the button for 3 seconds on the main screen to switch to the setting screen. ●Press the button to select ❶Clock ❷Unit(Speed/Temperature/tire pressure) ❸Backlight(Mode/Brightness/Color) ❹The tire circumference ❺The RPM shift light warning ❻Features display ❼Mileage maintenance ❽Total internal and external mileage NOTE During setting, if the button is not pressed in 30 seconds, it will automatically return to the startup screen.
PAGE 5
4-2 Speed, temperature, tire pressure unit settings ●In the speed, temperature, tire pressure unit settings main screen, hold the button for 3 seconds to enter into the main screen. ●EX : Set temperature unit from ˚F(Fahrenheit) to˚C(Celsius). ●Hold the button for 3 seconds to enter into the tire pressure unit settings screen. The screen may be shifted to the tire pressure unit setting screen when the vehicle supports TPMS. ●Example : To set speed unit to MPH(mile).
PAGE 6
●EX : The backlight brightness (day) setting is changed from 5/5 (100%) to 4/5 (80%). ●Hold the button for 3 seconds to enter the backlight color (night) setting. ●Example : To set backlight color(night) to Yellow. ●Press the button once to choose the color . Now the setting value will blink. NOTE Settings range : White, Red, Orange, Yellow, Green, Blue, Indigo, Purple. Default value : White. NOTE The backlight color will change immediately after you set the value.
PAGE 7
●The RPM shift light warning settings main screen. ●Press the button once to enter next setting. ●When the value of rotation speed reached the value set, the main screen's backlight will blink in red and white as a warning. 4-6 Features display settings ●In the display settings main screen, hold the button for 3 seconds to enter into the sub settings screen. ●EX : Set engine temperature display from show (S) to hidden (H).
PAGE 8
4-7 Mileage maintenance settings ●In the mileage maintenance main screen, hold the button for 3 seconds to enter into the sub settings screen. ●EX : Set the mileage maintenance from 500 to 800. ●Hold the button for 3 seconds to return to mileage maintenance main screen. ●Example : To set mileage maintenance to (ON). ●Press the button once to select the desired settings value. Now the setting value will blink. ●Mileage maintenance settings main screen.
PAGE 9
●Total mileage settings main screen. ●Press the button once to return to startup screen. ●EX : Set the total external mileage from 0 to 50,000 km. ●Hold the button for 3 seconds to return to the total external mileage settings main screen. ●Total external mileage settings main screen. ●Press the button once to return to total mileage settings main screen. 5 Trouble shooting The following situation does not indicate malfunction of the meter. C heck the following points, before taking it in for repairs.