Installation & Assembly

WASHER

0.31" x 0.63" x 0.06"

Ø 8mm x 16mm x 1.5mm

Qty: 08

BOLT

0.31" x 2.76"

Ø 8mm x 70mm

Qty: 08

ALLEN KEY

0.16" x 2.32"

Ø 4mm x 59mm

Qty: 01

Step 1:

- Attach the Leg (2), (3) into the Wall Unit (1).

- Using Allen Key (C ) to tighten all Bolts (B) and Washers (A).

Hardware and Tools

Components:

Before Starting:

1. Choose a clean, level, spacious assembly area. Avoid hard surfaces

that may damage the product.

2. Always read the instructions carefully before beginning assembly

to ensure that you have all required contents.

3. To prevent choking hazards, keep the packaging material out of

reach of small children

4. Do not over tighten the bolts as this may damage the thread.

5. Use only vendor supplied hardware to assemble. Using

unauthorized hardware could jeopardize the structural integrity of

the item.

6. The use of power tools to aid in assembly is not recommended.

Power tools can damage hardware and split wood.

SKU# 52003554

Assembly Instructions

KEEP INSTRUCTIONS

FOR FUTURE USE

ASSEMBLY REQUIRES

TWO PEOPLE

SUPPORT LEG x 1

LEGS (3) x 2

LEGS (2) x 2

WALL UNIT x 1

Page 1 of 2

PAGE 1
SKU# 52003554 KEEP INSTRUCTIONS FOR FUTURE USE Hardware and Tools A ASSEMBLY REQUIRES TWO PEOPLE Assembly Instructions Components: WASHER 0.31" x 0.63" x 0.06" Ø 8mm x 16mm x 1.5mm Qty: 08 BOLT 0.31" x 2.76" Ø 8mm x 70mm B Qty: 08 ALLEN KEY 0.16" x 2.32" Ø 4mm x 59mm C Qty: 1 2 01 1 WALL UNIT x 1 2 LEGS (2) x 2 3 LEGS (3) x 2 4 SUPPORT LEG x 1 Step 1: Before Starting: 1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product. 2.
PAGE 2
Assembly Instructions Continued Step 2: Step 3: Step 4: - Attach the Support Leg (4) into the apron as picture. - With two people carefully turn the wall unit over. - Adjust the bolt under support leg to level with the floor. - Completed item.