Operation Manual

22
FireWire Audio/MIDI device name list
MIDI Device
PortNo. MIDI IN MIDI OUT Remarks
1 ZERO 1 ZERO 1 Only for ZERO Edit
2 ZERO 2 ZERO 2 Only for MIDI control-
lers
3 ZERO 3 ZERO 3 For external MIDI IN/
OUT connectors
Note: Depending on the application you’re using, the application
may display its own port name rather than obtaining the
name from the ZERO4.
Audio Device
PortNo. Audio Input Corresponds to input jack
Audio Output Corresponds to output jack
(factory settings *1)
1 ZERO 1L CH1L
ZERO 1L CH1 L PRE EQ
2 ZERO 2L CH1R
ZERO 2L CH1 R PRE EQ
3 ZERO 3L CH2L
ZERO 3L CH2 L PRE EQ
4 ZERO 4L CH2R
ZERO 4L CH2 R PRE EQ
5 ZERO 5L CH3L
ZERO 5L CH3 L PRE EQ
6 ZERO 6L CH3R
ZERO 6L CH3 R PRE EQ
7 ZERO 7L CH4L
ZERO 7L CH4 L PRE EQ
8 ZERO 8L CH4R
ZERO 8L CH4 R PRE EQ
9 ---
ZERO 9L BUS A L
10 ---
ZERO 10L BUS A R
11 ---
ZERO 11L BUS B L
12 ---
ZERO 12L BUS B R
13 ---
ZERO 13L FX OUT L
14 ---
ZERO 14L FX OUT R
15 ---
ZERO 1L MASTER L
16 ---
ZERO 1L MASTER R
17 ZERO INVALID AUDIO 1
18 ZERO INVALID AUDIO 2
Note: In some cases, audio input ports number 17 and number 18
on your computer may show a port name such as “ZERO
INVALID AUDIO1, INVALID AUDIO2” or “INPUT17,
INPUT18.” These audio input ports are invalid, and cannot
be used.
Note: Depending on the application you’re using, the application
may display its own port name rather than obtaining the
name from the ZERO4.
*1: The output locations of the audio output ports can be changed
by using System Setup or the ZERO Edit application.
MIDI connections
In order to send and receive MIDI messages via the MIDI connectors, you
will need to obtain commercially-available MIDI cables. Connect these
cables between the ZERO4’s MIDI connectors and the MIDI connectors of
your external MIDI device.
MIDI IN connector: This receives MIDI messages from another MIDI device.
Connect it to the MIDI OUT connector of your external device.
MIDI OUT connector: This transmits MIDI messages from the ZERO4. Con-
nect it to the MIDI IN connector of your external device.