User manual

13
Using the metronome
Setting the tempo and time
signature
1.
Press the METRONOME ON buon.
The pendulum of the metronome will ap-
pear on the display and “
” will appear above it.
2.
Press the TEMPO
p
or
q
buon to set
the tempo.
Press and hold the TEMPO
p
and
q
buons simultaneously for 1 second to
switch between Pendulum Step (pendu-
lum of a mechanical metronome) and Full
Step. If Pendulum Step is selected, “
”
will appear on the display.
Aer selecting “PENDULUM STEP” or
“FULL STEP”, press the TEMPO
p
,
q
buons to set the tempo. This seing is
remembered even when the power is o.
If you’ve selected “PENDULUM STEP”
Pressing the TEMPO
p
or
q
buon will
increase or decrease the tempo value by 1
step. The value will change continuously if
you hold down the buon.
30
n
32
n
34 ... 88
n
92
n
96 ... 232
n
240
n
252
n
30 ...
If you’ve selected “FULL STEP”
Pressing the TEMPO
p
or
q
buon will
increase or decrease the tempo value by 1
step. The value will change continuously
if you hold down the buon.
30
n
31
n
32 ... 250
n
251
n
252
n
30 ...
3.
Press the START/STOP buon to start
the metronome.
The metronome pendulum will swing
from le to right according to the tempo
and the TAP TEMPO buon will blink
according to the tempo also.