User Manual

Table Of Contents
8
Adjust the volume
Rotate the VOLUME knob that’s located next to the power switch toward “MAX
to raise the volume level.
Rotate it le toward “MIN” to lower the level. (Fig. 3)
The VOLUME knob controls the output level of the built-in speakers, the head-
phones jacks and the LINE OUT jacks.
It is always beer to start with a low volume and then increase gradually.
Using the LINE IN/LINE OUT jacks
Use the LINE IN jack to listen to the sound from another musical instrument or
sound system through the speakers of the SP-280.
Connect this jack to the output jack of the other musical instrument or sound
system.
Use an audio cable with a stereo mini plug inserted into the SP-280 and a plug
on the other end appropriate for the connected device.
Use the LINE OUT jacks, if you want to connect your SP-280 to a mixer, stereo
hi-, or a couple of active monitors. When using a stereo hi-, connect the LINE
OUTs to the AUX or LINE inputs. For mono amplication, connect only the L/
MONO jack.
You must only connect devices with the power turned o. Careless opera-
tion may damage the SP-280 or the device where it’s connected, or malfunc-
tions may be caused .
Connection cables are sold separately. You will need to obtain the appropri-
ate commercially-available cables for your equipment.