User Manual

13
The right side of the keyboard, from E4 to C8, produces sounds in a range
two octaves lower (E2–C6).
The left side of the keyboard, from A0 to E
b
4, produces sounds in a range
two octaves higher (A2–E
b
6).
4. ToexitPartnermode,presstheDOWNbuonbesidethedisplaytoselect
oFF.
5. PresstheFUNCTIONbuon.
The FUNCTION LED turns o.
In Partner mode, the sound for the le and right sides can be changed, and the
volume can be adjusted. For details, refer to “Partner mode seings” on page 18.
Using pedals
Using the damper pedal
Pressing this pedal will sustain the sound, producing a richly resonant de-
cay. You can also use halfpedalling, with a gradual resonance eect depend-
ing on the depth of the pedal pressure (“half-pedaling”).
In Layer mode, you can select the sound(s) to apply the pedal to. (refer to
“Specifying layer pedals” on page 19)
Useoptionalpedalunit(soldseparately)toachievethreepedaleects.
Soft pedal (left)
Pressing this pedal will make the tone soer. You can control the soness of
the tone by how far down you press the on pedal (“half-pedaling”).
Sostenuto pedal (center)
Pressing this pedal will apply the damper eect only to the notes that are
already being held down on the keyboard, and will sustain only those notes.
The damper eect will not be applied to any additional notes that you play
while holding down the Sostenuto pedal.
Damper pedal (right)
Pressing this pedal will sustain the sound, producing a richly resonant de-
cay. You can also use halfpedalling, with a gradual resonance eect depend-
ing on the depth of the pedal pressure (“half-pedaling”).
In Layer mode, you can select the sound(s) where you want to apply the
pedal. (refer to “Specifying layer pedals” on page 19)
In Partner mode (see page 18), the damper eect can be applied indepen-
dently by both players.
Pitches A2 to E

6 for the player
on the left side
Pitches E2 to C6 for the player
on the right side
E

4
A0
E4
C8