User Manual

Table Of Contents

Playing two sounds at the same time (Layer mode)

You can play two sounds at the same time on the keyboard. This is called the

Layer mode.

Simultaneously press the two sound buons for the sounds to be played at the

same time. The LEDs for the two pressed sound buons will light up.

The lemost or uppermost selected sound buon is layer 1, and the other (right-

most or lowermost) one is layer 2 (see the diagram at the right).

For example, if E.PIANO1 and ORGAN1 are selected, E.PIANO1 is layer 1 and

ORGAN1 is layer 2.

In order to use sounds in different banks, first select the banks in the Single

mode for the sound buons to be pressed.

For example, to play by layering the grand piano and jazz organ 2 sounds, select

bank 1 (grand piano) for the PIANO1 buon and bank 2 (jazz organ 2) for the

ORGAN1 buon, and then press both buons simultaneously.

When selecting Layer mode, the total number of voices that can play at the

same time is reduced, depending on the total number of oscillators used by

the selected sounds. (refer to “About maximum polyphony” on page 22.)

Sounds in different banks for the same sound button (grand piano and

bright piano for the PIANO1 buon) cannot be selected.

Returning to the Single mode

To return to Single mode, just press a single sound selection buon.

Layer mode settings

In Layer mode, the volume balance between sounds can be adjusted, the oc-

tave for each sound can be shied, and the damper pedal can be enabled or

disabled for each sound. (refer to “Function mode” on page 17.)

Performing with another person (Partner mode)

Two people can play in the same range with the keyboard divided in half be-

tween them. This is called the Partner mode.

1. PresstheFUNCTIONbuon.

The FUNCTION and PIANO1 LEDs will light up.

2. PresstheE.PIANO1buon.

The LED for the E.PIANO1 sound buon lights up, and oFF appears in the

display.

3. PresstheUPbuonbesidethedisplaytoselecton.

Partner mode is turned on, and the PIANO1 sound is used for both the le

and right sides of the keyboard.

Layer 2

Layer 1

1,5

Partner mode