User Guide

4
If the following message is shown, the system firmware is already up to date, and no
update is necessary. If so, you can quit the KONTROL Updater.
If a “Product ID Error” message is shown after pressing the [Update] button, the
updater is likely not for the product you are trying to update. Please check again to be sure
you are using the right updater for your product.
9. The following window will appear during the update process.
Caution: Do not turn off the microKONTROL / KONTROL49 during the update process.
Note that the whole process will take several minutes to complete.