Operation Manual

31
TYPE (▲/▼ button) VALUE (Value Dial)
OCTAVE This generates a pitch one octave lower than the original
sound, and mixes it with the original sound to add a sense Adjusts effect level.
of depth and low end. This effect may not operate correctly (0...10.0)
if two or more strings are played simultaneously, or when
low-pitched strings are played.
RING An effect that produces bell-like sounds. Specify the frequency.
(1.0...10.0)
RINGUP A ring modulator in which the effect changes dynamically Adjusts sensitivity.
RINGDWN depending on your picking strength. (0...10.0)
AMP (Amp Modeling)
The control knobs (BASS, MIDDLE, TREBLE, VOLUME) will be active when you use amp modeling.
If amp modeling is "FX OFF," only the VOLUME knob will be active.
We recommend that you use this in conjunction with Cabinet modeling if you are using headphones,
or if you are outputting to a direct line (such as when recording).
When you use the Amp Modeling selector to select an amp, the PX4B will automatically select the
most appropriate cabinet modeling and turn it on.
The recommended cabinet printed in bold type in the following table will be the cabinet modeling type
that will be turned on.
When you use the bass synth (SYNTH), these control knobs will function as OSCILLATOR, FILTER,
DIRECT LEVEL, and SYNTH LEVEL.