Operation Manual

24
1.Select the effect that you wish to edit
Each time you press an √/® buttons, you will
cycle through the effects in the order shown be-
low. When an effect is selected, its icon will blink.
2.Editing each effect
For each effect, you can select the effect type
and set its parameter values.
Effects that are turned "FX OFF" will automati-
cally be turned on if you press the ENTER/REC
button or use the ▲/▼ buttons to select the ef-
fect type.
For details "On" the effect types and parameters,
refer to Effect Parameters (p.30). Renaming the
program, infrared transmitter settings, and writ-
ing the program are also performed here.
1) DYNA (Dynamics & Preamp Modeling)
This provides dynamic-type effects such as com-
pressor, and pre-amp modeling.
2) AMP (Amp Modeling)
This produces sounds that models a bass amp.