Operation Manual

23
The output will be mono in AUX Pitch mode.
The AUX Pitch setting is remembered even
when the power is turned off.
For some input sources, Bass Cancel may not
be as effective as you would like.
Use the Value dial to specify the amount of key
transposition. The key can be transposed in a
range of +/-1 octave.
The value can be adjusted upward and down-
ward for 3 semitones in 10 cent steps, and in
semitone steps (100 cents) for the remainder of
the range.
Edit mode
In this mode you can turn each effect On/Off, and
edit the effect type, parameter values, and pro-
gram name.
In Play mode, press the √ (or ®) button to ac-
cess the DYNA effect edit (or WRITE) screen,
entering Edit mode.
In any screen of Edit mode, you can use the con-
trol knobs to edit Amp modeling, or use the TAP
button to set the delay time of Delay modeling.
Press the EXIT button to return
to Play mode.
If a program was not written af-
ter it was edited, the decimal
point of the program number will
light.
The edited settings will return to the settings of
the original program if you switch programs or
turn off the power without performing the
“WRITE” function (see p.27).