Manual

Selecting and playing Styles

Selecting and playing a Style

Quick Guide

2 Select a Style from the Style Select window.

3 Be sure one of the Chord Scan modes is selected.

4 Press the SYNCHRO-START/STOP button to turn the START LED on.

This will turn the Synchro-Start function on, and let the accompaniment start as soon as you

play a chord on the keyboard.

Note: You could simply

press START/STOP to start the

Style, but the Synchro-Start

function allows you to make

the Style start in sync with

your playing on the key-

board. Therefore, it may be

considered a “more musical”

way of starting a Style.

5 Play the keyboard.

Note: The chord scan

area depends on the status of

the SPLIT LED and the Chord

Recognition parameter (see

Global > Mode Preferences >

Style).

6 Press START/STOP to stop the Style.

After pressing the EXIT button, the Style Select window

closes, and the main screen appears again, with the selected

Style ready to go.

For chord scanning to work, either of both LEDs must be turned on. Lower: chords

are recognized on the left of the split point; Upper: chords are recognized on the

right of the split point; Full (both LEDs on): chords are recognized on the whole key-

board. Off: only the Drum track can be heard.

START LED

STOP LED

When the Syncho-Start function is turned on, the Style starts

playing as soon as you play a note or chord in the chord scan area.

Play chords with your left hand, and the melody with your right

hand. The arranger will follow your playing.