Manual
378
Effects
Chorus, Flanger, and Phaser (Cho/Fln Phaser)
36: Stereo Phaser
This effect creates a swell by shifting the phase. It is very effective
on electric piano sounds. You can add spread to the sound by
offsetting the phase of the left and right LFOs from each other.
h: Resonance
i: Wet/Dry
The peak shape of the positive and negative Feedback value is
different. The harmonics will be emphasized when the effect
sound is mixed with the dry sound, if you set a positive value for
both “Resonance” and “Wet/Dry”, and if you set a negative value
for both “Resonance” and “Wet/Dry”.
h: High Damp [%]
This parameter sets the amount of damping of the resonance in
the high range. Increasing the value will cut high-range harmon-
ics.
37: St. Random Phaser
(Stereo Random Phaser)
This is a stereo phaser. The effect uses a step-shape waveform
and random LFO for modulation, creating a unique phasing
effect.
a
LFO Waveform Triangle, Sine Selects the LFO Waveform
LFO Shape –100...+100
Changes the curvature of the LFO 
Waveform
b
LFO Phase 
[degree]
–180...+180
Sets the LFO phase difference 
between the left and right
c
LFO Frequency 
[Hz]
0.02...20.00 Sets the speed of the LFO
Src Off...Tempo
Selects a modulation source for LFO 
speed
Amt
–20.00...
+20.00
Sets the modulation amount of LFO 
speed
d
MIDI Sync Off, On 
When this is on, the LFO speed is set 
by BPM, Base Note, and Times, 
instead of Frequency
BPM
MIDI, 
40.00...
300.00
MIDI syncs to the system tempo; 40–
300 sets the tempo manually for this 
individual effect
Base Note r...w
Selects the type of notes that 
specify the LFO speed
Times x1...x32
Sets the number of notes that 
specify the LFO speed
e
Manual 0...100
Sets the frequency to which the 
effect is applied
Src Off...Tempo
Selects the modulation source for 
the LFO modulation
Amt –100...+100
Sets the modulation amount of the 
LFO modulation
f
Depth 0...100 Sets the depth of LFO modulation
Src Off...Tempo
Selects the modulation source for 
the LFO modulation depth
Amt –100...+100
Sets the modulation amount of the 
LFO modulation depth
h
Resonance –100...+100
Sets the resonance amount
High Damp [%] 0...100
Sets the resonance damping 
amount in the high range
j
Wet/Dry
-Wet, -
1:99...Dry...99:1
, Wet
Balance between the wet and dry 
signal
Src Off...Tempo
Table , “Dynamic Modulation 
sources,” on page 357
Amt –100...+100 Amount of modulation source
Left
Right
Resonance
LFO Shape
LFO Phase
LFO: Tri / Sine
FX Amt
FX Amt
High Damp
Stereo In - Stereo Out
Phaser
Phaser
a
LFO Waveform
Step-Tri, Step-
Sin, Random
Selects the LFO Waveform
LFO Phase 
[degree]
–180...+180
Sets the LFO phase difference 
between the left and right
b
LFO Frequency 
[Hz]
0.02...20.00 Sets the speed of the LFO
Src Off...Tempo
Selects the modulation source 
commonly used for LFO speed and 
step speed
Amt
–20.00...
+20.00
Sets the modulation amount of LFO 
speed
c
LFO Step Freq 
[Hz]
0.05...50.00 Sets the LFO step speed
Amt
–50.00...
+50.00
Sets the modulation amount of LFO 
step speed
d
MIDI Sync Off, On 
When this is on, the LFO speed is set 
by BPM, Base Note, and Times, 
instead of Frequency
BPM
MIDI, 
40.00...
300.00
MIDI syncs to the system tempo; 40–
300 sets the tempo manually for this 
individual effect
Base Note r...w
Selects the type of notes that 
specify the LFO speed
Times x1...x32
Sets the number of notes that 
specify the LFO speed
e
Step Base Note r...w
Selects the type of notes to specify 
the LFO step speed
Times x1...x32
Sets the number of notes to specify 
the LFO step speed
f
Manual 0...100
Sets the frequency to which the 
effect is applied
Src Off...Tempo
Selects the modulation source for 
the LFO modulation
Amt –100...+100
Sets the modulation amount of the 
LFO modulation
g Depth 0...100 Sets the depth of LFO modulation
h
Resonance –100...+100
Sets the resonance amount
High Damp [%] 0...100
Sets the resonance damping 
amount in the high range
i
Wet/Dry
-Wet, -
1:99...Dry...99:1
, Wet
Balance between the wet and dry 
signal
Src Off...Tempo
Table , “Dynamic Modulation 
sources,” on page 357
Amt –100...+100 Amount of modulation source
LFO: Step-Tri/Random
Left
Right
Resonance
LFO Phase
FX Amt
FX Amt
High Damp
Stereo In - Stereo Out
Phaser
Phaser










