Operation Manual

Scale |871
Assigning the Retune Style command to an assignable switch,
footswitch or EC5 switch
Assign the Retune Style command to an assignable switch
1 Go to the Style Play/Song Play > Pad/Switch > Switch page.
2 Use one of the Switch 1…3 menus to choose a command to be assigned to
the corresponding switch. Since the first two switches are usually assigned
to the Sound Controllers, we suggest you use Switch #3.
3 Write the changes to a Keyboard Set. Writing to the special MY SETTING
Keyboard Set makes this setting available when turning the instrument on.
4 Be sure the lock is closed; this will leave the assignable switch functions un-
changed when choosing different Keyboard Sets.
Assign the Retune Style command to a footswitch or EC5 switch
1 Go to the Global > Controllers > Foot or EC5 page.
2 Use the Function or one of the A…E menus to choose a command to be as-
signed to the corresponding switch.
Using the Retune Style command
When the Retune Style command is assigned to an assignable switch, foot-
switch or EC5 switch, use it to change the Style Element Scale’s root key.
After choosing a Style, check the main page of the Style Play mode. If at
least one of the Style Elements has a sub-scale assigned, and it is enabled
on at least one of the tracks, the Key parameter will appear in the Style area.
Retune with an assignable switch
1 Just before having to retune the Style, press the assignable switch. The
indicator will start flashing.
2 Play a chord in the chord recognition area. The root of the chord will be the
new root of the scale. The indicator will stop flashing.