Operation Manual

786| Effects for the Sounds
b [O]Output Level 0…50 Sets the overdrive output level
Src Off…Tempo Selects the modulation source for the
overdrive output level
Amt –50…+50 Sets the modulation amount of the
overdrive output level
e [O]Low Cutoff [Hz] 20…1.00k Sets the center frequency for Low EQ
(shelving type)
Gain [dB] –18…+18 Sets the gain of Low EQ
f [O]Mid1 Cutoff [Hz] 300…10.00k Sets the center frequency for Mid/High
EQ 1 (peaking type)
Q 0.5…10.0 Sets the band width of Mid/High EQ 1
Gain [dB] –18…+18 Sets the gain of Mid/High EQ 1
g [O]Mid2 Cutoff [Hz] 500…20.00k Sets the center frequency for Mid/High
EQ 2 (peaking type)
Q 0.5…10.0 Sets the band width of Mid/High EQ 2
Gain [dB] –18…+18 Sets the gain of Mid/High EQ 2
CHORUS/FLANGER
h [F]LFO Frequency
[Hz]
0.02…20.00 Sets the speed of the LFO
LFO Waveform Triangle, Sine Selects the LFO Waveform
i [F]Delay Time [msec] 0.0…1350.0 Sets the delay time
Depth 0…100 Sets the depth of LFO modulation
Feedback –100…+100 Sets the feedback amount
j [F]Cho/Flng Wet/Dry -Wet, -1:99…
Dry…99:1, Wet
Sets the effect balance of the chorus/
flanger
Src Off…Tempo Selects the Wet/Dry modulation
source for the chorus/flanger
Amt –100…+100 Sets the Wet/Dry modulation amount
for the chorus/flanger
k [F]Output Mode Normal, Wet
Invert
Selects the output mode for the cho-
rus/flanger
Routing OD/HG › Flanger,
Flanger › OD/HG
Switches the order of the overdrive
and chorus / flanger
l Wet/Dry Dry, 1:99…99:1,
Wet
Balance between the wet and dry sig-
nal
Src Off…Tempo See DMS (Dynamic Modulation Source)
Amt –100…+100 Amount of modulation source