Operation Manual
Effect parameters |773
h [D]Mt.Delay Wet/Dry Dry,
1 : 99…99 : 1, Wet
Sets the multitap delay effect balance
Src Off…Tempo Selects the Wet/Dry modulation source
for the multitap delay
Amt –100…+100 Sets the Wet/Dry modulation amount
for the multitap delay
i Routing Comp › Mt.Delay,
Mt.Delay › Comp
Switches the order of the compressor
and multitap delay
j Wet/Dry Dry, 1:99…99:1,
Wet
Balance between the wet and dry signal
Src Off…Tempo See DMS (Dynamic Modulation Source)
Amt –100…+100 Amount of modulation source
Limiter - P4EQ (Limiter - Parametric 4-Band EQ)
This effect combines a mono limiter and a four-band parametric equalizer.
You can change the order of the effects.
Left
Right
FX Amt
FX Amt
FX Amt = 100: Mono In - Mono Out / FX Amt = 0: Stereo In - Stereo Out
+
Routing
Limiter
Trim
Parametric 4Band EQ
Limiter
Gain Adjust
Envelope - Control
LIMITER
a [L]Ratio 1.0 : 1…
50.0 : 1, Inf : 1
Sets the signal compression ratio
Threshold [dB] –40…0 Sets the level above which the compres-
sor is applied
b [L]Attack 1…100 Sets the attack time
Release 1…100 Sets the release time
c [L]Gain Adjust [dB] –Inf,
–38…+24
Sets the limiter output gain
P4EQ