Operation Manual

74 0 | Effects for the Sounds
Grain Shifter
This effect cuts extremely short samples (‘grains’) from the input signal
waveform and plays them repeatedly, giving a mechanical character to the
sound.
+
Left
Right
Sample Cycle
FX Amt
FX Amt
FX Amt = 100: Mono In - Mono Out / FX Amt = 0: Stereo In - Stereo Out
LFO
D
-mod
Trigger
Grain Shifter
a Duration 0…100 Sets the duration of the grain
Src Off…Tempo Selects the source that will modulate the dura-
tion of the grain
Amt –100…+100 Sets the amount by which the grain duration
will be modulated
b LFO Sync Src Off…Tempo Selects the modulation source that will reset
the LFO
c LFO Sample
Cycle [Hz]
0.02…20.00 Sets the frequency at which the grain will be
switched
Src Off…Tempo Selects a modulation source for LFO speed
Amt –20.00…
+20.00
Sets the modulation amount of LFO speed
d MIDI Sync Off, On When this is on, the LFO speed is set by BPM,
Base Note, and Times, instead of Frequency
BPM MIDI,
40.00…
300.00
MIDI syncs to the system tempo; 40–300 sets
the tempo manually for this individual effect
Base Note
…
Selects the type of notes that specify the LFO
speed
Times x1…x32 Sets the number of notes that specify the LFO
speed
e Wet/Dry Dry, 1:99…99:1,
Wet
Balance between the wet and dry signal
Src Off…Tempo See DMS (Dynamic Modulation Source)
Amt –100…+100 Amount of modulation source