Operation Manual

Effect parameters |727
i: Wet/Dry
The effect sound’s phase will be reversed when you set this parameter in the
negative range of values.
St. MultiModeFilter (Stereo Multi Mode Filter)
This is a multi-mode filter with four types; low pass, high pass, band pass,
and band reject. You can use LFO or dynamic modulation to vary the cutoff
frequency or resonance.
Left
Right
FX Amt
FX Amt
Stereo In - Stereo Out
Multimode Filter Driver
Driver
Trim Output
OutputTrim
LFO Phase
LFO: Tri / Sine
LFO Shape
LPF
HPF
BPF
BRF
Filter Type
Multimode Filter
a Type LPF, HP F, B P F,
BRF
Selects the type of filter
Trim 0…100 Sets the input level
b Cutoff 0…100 Sets the cutoff frequency (center fre-
quency)
Src Off…Tempo Selects the modulation source of the cut-
off
Amt –100…+100 Sets the modulation amount of the cutoff
c Resonance 0…100 Sets the resonance amount
Src Off…Tempo Selects the source that will modulate the
amount of resonance
Amt –100…+100 Sets the amount by which the resonance
will be modulated
d LFO Waveform Triangle, Sine Selects the LFO Waveform
Phase [degree] –180…+180 Sets the LFO phase difference between
the left and right
Depth 0…100 Sets the depth to which the LFO will mod-
ulate the cutoff frequency