Operation Manual

Effect parameters |645
a Autofade Src Off…Tempo Selects the modulation source that
starts AutoFade
Fade-In Delay [msec] 00…2000 Sets the fade-in delay time
Rate 1…100 Sets the rate of fade-in
b LFO Frequency Mod D-mod,
AUTOFADE
Switches between D-mod and AUTOFADE
for the LFO frequency modulation
Wet/Dry Mod D-mod,
AUTOFADE
Switches between D-mod and AUTOFADE
for the effect balance modulation
c LFO Waveform Triangle, Sine Selects the LFO Waveform
LFO Shape –100…+100 Changes the curvature of the LFO
Waveform
d LFO Phase [degree] –180…+180 Sets the LFO phase difference between
the left and right
e LFO Frequency [Hz] 0.02…20.00 Sets the speed of the LFO
Src Off…Tempo Selects a modulation source for LFO
speed
Amt –20.00…
+20.00
Sets the modulation amount of LFO
speed
f L Delay Time [msec] 0.0…500.0 Sets the left channel delay time
R Delay Time [msec] 0.0…500.0 Sets the right channel delay time
g Depth 0…200 Sets the depth of LFO modulation
h Feedback –100…+100 Sets the feedback amount
High Damp [%] 0…100 Sets the feedback damping amount in
the high range
i Wet/Dry -Wet, -1:99…
Dry…99:1, Wet
Balance between the wet and dry signal
Src Off…Tempo See DMS (Dynamic Modulation Source)
Amt –100…+100 Amount of modulation source