Operation Manual

Effect parameters |625
Stereo Phaser
This effect creates a swell by shifting the phase. It is very effective on elec-
tric piano sounds. You can add spread to the sound by offsetting the phase
of the left and right LFOs from each other.
Left
Right
Resonance
LFO Shape
LFO Phase
LFO: Tri / Sine
FX Amt
FX Amt
High Damp
Stereo In - Stereo Out
Phaser
Phaser
a LFO Waveform Triangle, Sine Selects the LFO Waveform
LFO Shape –100…+100 Changes the curvature of the LFO Waveform
b LFO Phase [degree] –180…+180 Sets the LFO phase difference between the
left and right
c LFO Frequency [Hz] 0.02…20.00 Sets the speed of the LFO
Src Off…Tempo Selects a modulation source for LFO speed
Amt –20.00…
+20.00
Sets the modulation amount of LFO speed
d MIDI Sync Off, On When this is on, the LFO speed is set by BPM,
Base Note, and Times, instead of Frequency
BPM MIDI,
40.00…
300.00
MIDI syncs to the system tempo; 40–300
sets the tempo manually for this individual
effect
Base Note
…
Selects the type of notes that specify the
LFO speed
Times x1…x32 Sets the number of notes that specify the
LFO speed
e Manual 0…100 Sets the frequency to which the effect is ap-
plied
Src Off…Tempo Selects the modulation source for the LFO
modulation
Amt –100…+100 Sets the modulation amount of the LFO
modulation