Operation Manual

Effect parameters |621
a Delay Time [msec] 0.0…50.0 Sets the delay time from the original
sound
b LFO Waveform Step-Tri,
Random
Selects the LFO Waveform
LFO Phase [degree] –180…+180 Sets the LFO phase difference between
the left and right
c LFO Frequency [Hz] 0.02…20.00 Sets the speed of the LFO
Src Off…Tempo Selects the modulation source used for
both LFO speed and step speed
Amt –20.00…
+20.00
Sets the modulation amount of LFO speed
d LFO Step Freq [Hz] 0.05…50.00 Sets the LFO step speed (speed that
changes in steps)
Step Amt –50.00…
+50.00
Sets the modulation amount of LFO step
speed
e MIDI Sync Off, On When this is on, the LFO speed is set by
BPM, Base Note, and Times, instead of
Frequency
BPM MIDI,
40.00…
300.00
MIDI syncs to the system tempo; 40–300
sets the tempo manually for this individ-
ual effect
Base Note
…
Selects the type of notes that specify the
LFO speed
Times x1…x32 Sets the number of notes that specify the
LFO speed
f Step Base Note
…
Selects the type of notes to specify the
LFO step speed
Times x1…x32 Sets the number of notes to specify the
LFO step speed
g Depth 0…100 Sets the depth of LFO
modulation
h Feedback –100…+100 Sets the feedback amount
High Damp [%] 0…100 Sets the feedback damping amount in the
high range
i Wet/Dry -Wet, -1:99…
Dry…99:1, Wet
Balance between the wet and dry signal
Src Off…Tempo See DMS (Dynamic Modulation Source)
Amt –100…+100 Amount of modulation source