Operation Manual

Effect parameters |611
MOD (Modulation)
Stereo Chorus
This effect adds thickness and warmth to the sound by modulating the delay
time of the input signal. You can add spread to the sound by offsetting the
phase of the left and right LFOs from each other.
Chorus
Chorus
Left
Right
LFO Phase
FX Amt
FX Amt
Stereo In - Stereo Out
EQ Trim
EQ Trim
LEQ
HEQ
LEQ
HEQ
LFO: Tri / Sine
a LFO Waveform Triangle, Sine Selects the LFO Waveform
LFO Phase [degree] –180…+180 Sets the LFO phase difference between
the left and right
b LFO Frequency [Hz] 0.02…20.00 Sets the speed of the LFO
Src Off…Tempo Selects a modulation source for LFO
speed
Amt –20.00…
+20.00
Sets the modulation amount of LFO
speed
c MIDI Sync Off, On When this is on, the LFO speed is set by
BPM, Base Note, and Times, instead of
Frequency
BPM MIDI,
40.00…
300.00
MIDI syncs to the system tempo; 40–300
sets the tempo manually for this indi-
vidual effect
Base Note
…
Selects the type of notes that specify the
LFO speed
Times x1…x32 Sets the number of notes that specify
the LFO speed
d L Pre Delay [msec] 0.0…50.0 Sets the delay time for the left channel
R Pre Delay [msec] 0.0…50.0 Sets the delay time for the right channel